Samurai 120H V1 (last one!)
Samurai 120H V1 (last one!)
Machine lead time: 4 weeks
ATC lead time: 4 weeks
The Last Samurai 120H V1 available.
This product will soon be discontinued and replaced with Samurai 120H V2, which features larger THK linear rails, precision ground ballscrews, 12K RPM Samurai Spindle with a 1.5kW motor. Available here
This is not a ready to run machine. This machine arrives as a kit which requires full assembly. CNC Electronic components are not included.
Introduction to CNC electronics here
Guide to building basic CNC electronics here
Example of advanced CNC electronics here
Included with purchase:
1x Samurai 120H Machine
1x Certificate of ownership
1x Assembly manual
1x User manual
1x 12 month warranty
1x Lifetime machine support
*Laptop, Mach 4, workbench, XYZ servos, toolholders not included
Scroll down for all technical details.
The Samurai 120 Desktop machining center is a proven solution to fill the need for a capable desktop mill in the hobby / light industrial market.
Fitted with a 5.5nm spindle, allowing you to take larger cuts with bigger tools in harder materials.
Capable of holding *±0.01mm tolerances
Allowing you to manufacture high end components
While making real chips
304 stainless
Choose your own controller
- Best option for the DIY CNC'ers
- Fully customize your machine by retrofitting your own cnc controller and electronics.
- Save cost on the overall machine
NEMA 23 Closed loop steppers
Enough power to take large cuts but not enough power to damage the machine during crashes.
The ballscrew-motor configuration has been optimized to maximize machining performance without causing damage in the event of a crash‡. The motors feature an alarm function to automatically E-stop the machine if a crash occurs.
(not included as standard)
Easy access for changing parts
The Y axis was designed with more travel than the spindle centerline to column distance, which allows the table to fully retract giving you full access for changing parts / setups.
The table rests just 80mm (3.1") away from the front of the machine; your back will thank you for choosing the 120.
Coolant proof way cover protection on all axis
Making reliable way cover protection is an extremely difficult task.
Over time chips manage to find their way into everything, which is why the 120 way cover design has gone through 5 years of iterations to ensure the highest level of protection.
Oversized ballscrews
During 5 years of testing we found the ballscrews to wear far sooner than the linear rails, so the Samurai 120 features oversized ballscrews to accommodate for the increased wear.
This now means the machine can be run at higher speeds with faster accelerations.
The combination of large ballscrews with small axis motors allows you to push the machine without having to worry about ballscrew wear.
Fully tested to withstand worst case conditions
We always push our machines to the limit for testing purposes, to expose and understand weak points in the design.
Easily change fixtures with a fixture plate built into the table
Dowel pins allow effortless changing of fixtures without probing